Connecting the antennas
XM Mini-Tuner system—TH-D70 only
XM 
XM
For better reception, install the XM
–Near a
–Where “Channel 1” can be heard clearly
–Where the Antenna Aiming display shows a value higher than 0 for either satellite or terrestrial signal
strength (
17)
AM and FM antennas
Make sure the antenna conductors do not touch any other terminals, connecting cords or power cords.
AM loop antenna (supplied)
FM antenna
(supplied)
Turn it until the best reception is obtained.
Extend it horizontally.
For better FM reception
FM outdoor antenna (not supplied)
Standard type (75 Ω
coaxial) connector FM outdoor antenna cord (not supplied)
Do not connect the power cord until all other connections have been made.
Connecting a TV
Connect the TV to the appropriate video out jacks to view the playback picture.
The picture quality order is as follows:
HDMI > Component video >
Make the following settings after connecting the TV:
–Color system and scanning mode (
15)
–MONITOR TYPE (
30)
Connection using the HDMI terminal
From HDMI input
TV terminal
HDMI cable (not supplied)
You can make the following settings for the TV when the HDMI connection is used:
–HDMI DVI COLOR (
30)
–HDMI OUT (
30)
–HDMI AUDIO OUT (
30)
–DOWN MIX (
30)*
Use a certified HDMI cable, which has the HDMI logo.
You can use a monitor with a DVI terminal by connecting with a
When you play HDCP
On some TVs, no sound may come out during playback of sources such as DVD Audio even when
the HDMI AUDIO OUT setting is “ON” (
30).
*This setting is available only when the speaker position
mode is set to “S.SPK F” ( 
13).
Continued on the next page
8