If you connect speakers other than those supplied for the System, use speakers of the same speaker impedance (SPEAKER IMPEDANCE) indicated on the rear of the center unit.

DO NOT connect more than one speaker to one speaker terminal.

TH-D70 only:

–You can install the front speakers on the wall. When installing them on the wall, do not attach the stands and base plates.

–When installing the front speakers on the floor, they are to be assembled before use (see below).

Assembling the front speakers —TH-D70 only

Front speaker

Stand (2)

Base plate (2)

(SP-THD7F) (2)

 

 

Assembled speakers:

You can assemble the front speakers either with or without stands.

or

Before assembling:

Take care not to drop any component part while assembling; otherwise, it may cause an injury or damage to the floor.

Prepare a Phillips screwdriver (not supplied).

Do not connect the power cord until all other connections have been made.

1When assembling a speaker with stand:

Speaker

Screws M4 x 25 mm (supplied)

Stand

When assembling a speaker without stand:

Speaker

Stand

Bottom cover

Detach the bottom cover and the screws (M4 x 30 mm) from the stand, then attach them to the bottom of the speaker.

2

Connect the speaker cord.

( 5)

Base plate

Stand or speaker directly

Screws M5 x 115 mm (supplied)

When holding a speaker, always grasp the lower portion.

6