JVC Speaker setting menu (SPK.SETTING), Other setting menu (OTHERS)

Underlined items are the initial settings.

Speaker setting menu (SPK.SETTING)

SPK.SETTING menu is available only when the speaker position mode is set to “S.SPK R” ( 13).

LEVEL	Adjust the output level of each speaker while monitoring the test tone.
	FRONT LEFT/RIGHT SPEAKER, CENTER SPEAKER, SURROUND RIGHT/LEFT
	SPEAKER: Select the speaker, then adjust the output level.
	TEST TONE: Turns on/off the test tone.
DELAY	Adjust the delay time of the speakers.	Ex.:					Subwoofer
	FRONT LEFT/RIGHT SPEAKER,			Center
	CENTER SPEAKER, SURROUND			1 ms
			Front left
	RIGHT/LEFT SPEAKER: Select the		0 ms
								Front right
	speaker, then adjust the distance from							0 ms
	the listening position to the speakers.
									3.0 m
	• 1 ms increase (or decrease) in delay time
							2.7 m
	corresponds to about 30 cm decrease (or
						2.4 m
	increase) in distance.				2.1 m
	• Set to 0 ms for the furthest speaker from
	your position as the basis for the delay time		Surround left				Surround right
	setting.		2 ms				2 ms

SUBWOOFER Make the subwoofer settings.

LEVEL: Adjust the output level of the subwoofer.

CROSS OVER: Select an appropriate crossover frequency according to the size of the cone speaker unit built into the small speaker connected.

120Hz: Select this when the cone speaker unit size is 8 cm or more.

150Hz: Select this when the cone speaker unit size is between 6 cm and 8 cm.

200Hz: Select this when the cone speaker unit size is 5 cm or less.

Other setting menu (OTHERS)

RESUME	Activate (ON) or deactivate (OFF) the resume function.
ON SCREEN GUIDE Activate (ON) or deactivate (OFF) the on-screen guide icons.

DivX REGISTRATION The System has its own Registration Code for DivX playback. You can confirm the code of your System.

•Once you play back a DivX file created by using the Registration Code, the System’s code is overwritten by a totally different new one for copyright protection purposes.

31