FM/AM tuner operations
Set the remote control mode before operation.
*
•Select the desired band (“FM” or
“AM”) you want to listen to.
(
12)
*
You can also tune in to a station automatically. Press and hold TUNING 9/TUNING ( until the station search starts. The system automatically tunes in the
You can also tune in to the station by pressing cursor 5/Y.
Preset tuning
You can preset 30 FM stations and 15 AM stations.
Storing the preset stations
1Tune in to the station you want to preset.
2
“_ _” flashes on the display. Perform the next
step while “_ _” is flashing.
3Select a preset number, then store the station to that number.
Store
Enter a preset number*1
• “STORED” appears on the display.
Setting the AM tuner interval spacing
Some countries space AM stations 9 kHz apart, and some countries use 10 kHz spacing.
You can only change the AM tuner interval spacing while selecting “AM” as the band.
• This operation is available when the System is turned off.
To change the interval | To change the interval |
spacing into 10 kHz | spacing into 9 kHz |
«Hold | «Hold |
(On the center unit) | (On the center unit) |
Manual tuning
Tuning in to a station
Tuning in to a preset station
Select a preset number.*
You can also select a preset number
by pressing PRESET(/CAT) UP*2 or PRESET(/CAT) DOWN*2.
*1For details on using the number buttons, see “How to use the
number buttons” (
11).
Selecting the FM reception mode
When the stereo FM program currently tuned in is noisy, you can change the FM reception mode to improve the reception.
Normally select this.
AUTO • When a stereo station is tuned in, the ST indicator lights on the
display.
MONO Select to improve reception. (You will lose the stereo effect.)
16