Setting Up The TV

1Turn off your TV and disconnect all cables.

2Carefully place the TV face down on a flat, clean, and padded surface. If available, put TV cover or protective sheet onto the TV before laying the TV down on flat surface.

3Using a cross-tip screwdriver, remove four screws securing TV stand to rear of TV. Remove TV stand.

4Follow instructions in wall mount kit and install wall mount. Install TV onto wall mount in accordance with wall mount kit instructions.

NOTE: Wall mount screw hole pattern on rear of this model is VESA 400 x 400mm, with M8 screws

16

Page 17
Image 17
JVC SP55MC manual Setting Up The TV