Masterpage:Right+
EN 77
Filename [DVM70S_13Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 77Monday, 27 December 2004 14:08
1Press SET UP to access the Main Menu screen.
2Press DE to select AINITIAL SET UPB, then press G.
3Press DE to select ACLOCK
SETB, then press G.
NOTE:
When you have selected
AMAGYARORSZÁGB, AČESKÁ
REPUBLIKAB, APOLSKAB or
AOTHER EASTERNB for the
country setting (Apg. 17), you
cannot use Just Clock
function. Skip steps 5 and 6.
4Press FG to select AYEARB, then press ENTER. Press FG to
set the year, then press ENTER.
Repeat the same procedure to set the date and time.
When you set the date, press and hold FG to change the date
by 15 days interval.
When you set the time, press and hold FG to change the time
by 30 minutes interval.
5Press FG to select AJUST CLOCKB, then press ENTER. Press
FG to set to the desired mode, then press ENTER.
The default setting is AOFFB.
For the Just clock function, refer to AJust ClockB on the right
column.
If you set to AOFFB, you can disregard the next step as you
won’t be able to receive regular clock adjustments.
6Press FG to select ATV PROGRAMMEB
, then press
ENTER.
Press FG to set the channel position to the number
representing the station transmitting clock setting data, then
press ENTER.
The unit is preset to receive clock setting and adjustment data
from channel position 1.
7Press SET UP to start the clock operation.
NOTES:
Just Clock (when set to AONB) adjusts the unit’s built-in clock
every hour, except for 23:00, 0:00, 1:00 and 2:00.
Just Clock is not effective when:
^the unit’s power is on.
^the unit is in the Timer mode.
^a difference of more than 3 minutes exists between the built-in
clock’s time and the actual time.
^the unit is in the Automatic Satellite Programme Recording
mode. (Apg. 48) (HDD deck only)
^the unit is in the Power Save mode. (Apg. 73)
^AL-2 SELECTB is set to ASAT VIDEOB or ASAT S-VIDEOB.
(Apg. 63)
If Just Clock is set to AONB, the unit’s clock is automatically
adjusted at the start/end of Summer Time.
Just Clock may not function properly depending on the reception
condition.
Just Clock
The Just Clock function provides accurate time keeping through
automatic adjustments at regular intervals, by reading data from a
PDC signal.
The Just Clock option can be set to AONB or AOFFB at the Clock Set
screen (the default setting is AOFFB).
IMPORTANT:
If you turn off Just Clock, the accuracy of your unit’s built-in clock
may be reduced, which could adversely effect timer recording. We
recommend you to keep Just Clock on. In cases where the clock
setting data from a PDC signal is incorrect, however, you are
advised to keep Just Clock set to AOFFB.

Clock Set

IMPORTANT:
If you performed Auto Set Up (Apg. 17) or Preset Download
(Apg. 18), without ever having set the clock previously, the
unit’s built-in clock is also set automatically.
Perform the following steps only if ^
^Auto Clock Set has not been performed correctly by Auto Set
Up or Preset Download.
OR
^you want to change Just Clock setting. (See AJust ClockB in
the right column)
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/SAT/DVD switch to DVD.
FGDE
ENTER
SET UP
CABLE/SAT
DVDTV
2004
--:--
1
ENTER
SELECT
SET UP
EXIT
DVD VIDEO SET UP
YEAR
HDD/DVD/DV SET UP
FUNCTION SET UP INITIAL SET UP
TUNER SET CLOCK SET
DATE
TIME
JUST CLOCK
TV PROGRAMME
01. 01 THU
OFF
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
DVM70S_00.book Page 77 Monday, December 27, 2004 2:08 PM