Filename [DVM70S_10Timer Recording.fm]
Masterpage:Left0
44 EN
Page 44Monday, 27 December 2004 14:08
TIMER RECORDING ON HDD/DVD DECK
You can programme this unit to timer-record as many as 16
programmes.
With the a system, timer programming is greatly simplified
because each TV programme has a corresponding code number
which your unit is able to recognise.
You can use the remote control to enter the a number.
1Load a recordable disc if recording to DVD.
2Press PROGRAMME to access the programme top screen.
3Press FGD E to select ASHOWVIEWB, then press ENTER.
●When APROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMMESB appears on the TV screen, you need to
cancel some of the reserved programmes. (Apg. 47)
4Press the number keys to
enter the a number of
a programme you wish to
record.
OR
Press FGD E to select the
desired number key on the
screen, then press ENTER.
Repeat to enter all required
numbers.
●If you have made a mistake, press FGD E to select ADELETEB
or ADELETE ALLB, then press ENTER and input the correct
number before you press ENTER again.
5Press FG to select ARECORD TOB, then press ENTER. Press
FG to select the desired recording deck, then press ENTER.
6Press FGD E to select ACONFIRMB, then press ENTER.
●If the number you entered is invalid, ASHOWVIEW NO. ERROR
CONFIRM SHOWVIEW NO. THEN RETRYB appears on the TV
screen. Input a valid a number.
●If AGUIDE PROGRAMME IS NOT SET SET GUIDE
PROGRAMME THEN RETRYB appears on the TV screen, set
Guide Programme Numbers manually. (Apg. 74)
7The a number you entered and the matching timer-
recording information are displayed on the TV screen. Check
the programme data.
●To cancel this setting, press RETURN.
8Press FG to select the desired recording option as required.
Press FG to select the desired setting, then press ENTER.
●AINPUT TITLEB (Apg. 50, AModify Title NameB)
●ACATEGORYB (Apg. 51, AModify CategoryB)
●AVPS/PDCB (Apg. 45, AVPS/PDC RecordingB)
●AWEEKLY/DAILYB (Apg. 45, AWeekly/Daily RecordingB)
●AREC MODEB (Apg. 32, ARecording ModeB)
9Press FG to select AOKB, then press ENTER to access the
Programme Confirmation screen.
10 Press DE to select AEXITB, then press ENTER to complete
timer programming.
●To programme another timer, press DE to select
ACONTINUEB, then press ENTER.
●If APROGRAMME OVERLAPPEDB appears on the TV screen,
delete or modify the programmes.
NOTES:
●There may be cases that the a Timer Programming
function prolongs the stop time of the programming.
●When two successive programmes are recorded on a DVD-RW
disc with the a Timer Programming function, the
beginning of the second one may be left off the recording.
●If the copy limited programme is received during timer-recording,
the unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you
programmed.
b Timer Programming
●Make sure that the unit’s built-in clock is set properly.
●Turn on the unit.
●Turn on the TV and select the AV mode.
●Slide the TV/CABLE/SAT/DVD switch to DVD.
PROGRAMME
DISPLAY
0 – 9
VPS/PDCj
RETURN
FGDE
ENTER
CABLE/SAT
DVDTV
SHOWVIEW NO.
1234
12
456
789
0
3
1
2
3
1
2
2
3
ENTER
SELECT
PROGRAMME
EXIT
PROGRAMME > SHOWVIEW (1/2)
PRESS [PROGRAMME]
TO EXIT
SELECT WITH @
THEN PRESS [ENTER]
RECORD TO DVD
CONFIRM
DELETE
DELETE ALL
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see Ab System SetupB (Apg. 74) and
set the Guide Programme number correctly.
IMPORTANT:
If you have moved to a different area or if a broadcasting
station’s channel number has been changed, the wrong channel
number will be displayed on the a programme screen in
step 7. When this happens, set the correct Guide Programme
number for that station. (Apg. 74, Ab System SetupB)
Satellite Receiver Users
To timer-record a satellite broadcast using the a system:
APerform Ab Timer ProgrammingB (Apg. 44).
BSet the satellite receiver to the appropriate channel before
the selected programme begins.
CLeave the satellite receiver’s power on.
DVM70S_00.book Page 44 Monday, December 27, 2004 2:08 PM