JVC SR-V10U manual C Watching one program while recording another, D Showing on-screendisplay

EN 21

C Watching one program while recording another

1 Engage TV mode

During recording...

●If you connect the TV and the VCR only using the RF connection (☞ pg. 7) to view pictures from the VCR

Press TV/VCR on the Remote so that VCR mode indicator goes off from the front display panel. (The TV broadcast being recorded disappears.)

●If you are using the AV connection (☞ pg. 7) to view pictures from the VCR, change the TV’s input mode from AV to TV.

2 Select channel for viewing

Select the channel, you want to watch, on the TV.

D Showing on-screen display

When “ON SCREEN (REC)” is set to “ON” (☞ pg. 37, 38), you can see the current VCR status on the TV screen.

●For more detailed information about the on-screen display, see page 61.

1 Display VCR status on TV screen

During recording or	CH	125		RECORD
recording pause, press	FRI 12:00:00 AM				PAUSE
OSD.	11/30/01				]SP
	STEREO
All indications	SAP
	B	+	+	+		E
corresponding to the
current VCR status are				INDEX 1
	NORM		REMAIN		10:00
displayed for 5 seconds.	HI–FI		COUNT	–1:23:45

The time counter remains

on the screen indicating the elapsed time.

●The indications will be recorded. If you do not want to record the superimposed operational indications on the screen, set “ON SCREEN (REC)” to “OFF”. (☞Ê pg.Ê 37, 38)

2 Exit on-screen display

Press OSD again.

NOTES:

●If the VCR is in recording pause mode, “RECORD/PAUSE” is always displayed (except when "DAY/TIME INSERT" is set to "ON").

●The VCR status can be also displayed during playback.

Other useful functions for recording

●Recording Resume Function

If there is a power outage during recording (or timer recording or Series Recording), the recording will resume automatically when the power is restored to the VCR. (No setting is required for this function.)

●Video Calibration (☞ pg. 38)

When this function is set to “ON”, this VCR checks the condition of the tape in use during playback and recording, and compensates to provide the highest- possible pictures.

●Second Audio Recording (☞ pg. 40)

This VCR’s built-in MTS decoder enables reception of Multichannel TV Sound broadcast.

To record a SAP program received, set “2ND AUDIO RECORD” to “ON” using the menu screen.

NOTES:

When the channel is changed on the VCR;

●The “STEREO” indication appears on the screen for about 5 seconds if the program is a stereo broadcast.

●The “SAP” indication appears on the screen for about 5Ê seconds if the program is a SAP broadcast.

●Both indications appear when a stereo program is accompanied by SAP sound.

●S-VHS Recording Mode (☞ pg. 40)

This VCR allows you to record on an S-VHS tape with VHS picture quality.

●S-VHS ET (☞ pg. 41)

This function allows you to record on VHS tapes with S- VHS picture quality. Tapes recorded using this function can be played back on a VCR equipped with the S-VHS ET function.

To prohibit operations during recording (Mode Lock) Press and hold OK on the Remote for more than 5 seconds. "" and "" light up on the front display panel (☞ pg. 60). No button will function and recording will not be interrupted until it completes.

To resume the other operations, press and hold OK on the Remote again for more than 5 seconds.

●When OK is pressed to set Mode Lock, the on-screen display appears and the time counter will be recorded with your picture. If the time counter is not necessary, set "ON SCREEN (REC)" to "OFF" ( ☞ pg. 37, 39).