EN 45
You can use a camcorder as the playback VCR and your VCR as the recording VCR
1 Make connections
Connect an audio/video cable between the camcorder’s audio/video output connectors and your VCR’s audio/video input connectors.
●When using a camcorder with a monaural output, connect the audio output connector on the camcorder to the left audio input connector on this VCR.
2 Load a cassette
Insert the cassette to be recorded on into this VCR (for recording).
3Select input mode on this VCR
Select
Select
On the front panel:
Push the JOG dial, then turn it to the left or right.
On the Remote:
Press the Number key "0 (AUX)" and/or CH
4 Select video input terminal
Follow the procedure described on pages 37 and 40.
When using S VIDEO terminal, set “FRONT AUX INPUT” (or “REAR AUX INPUT” if you use the connectors on the rear) to
When using VIDEO terminal, set “FRONT AUX INPUT” (or “REAR AUX INPUT”) to “VIDEO”.
5Select edit mode
Follow the procedure described on pages 37 and 38.
6Return to normal screen
Press MENU.
7StartSet theplaybackcamcorder to its play mode.
NOTE:
If the camcorder is equipped with a superimpose/OSD disable feature then set it to “OFF” before starting playback.
8Start recording
On the front panel:
Press REC ( ¦ ).
On the Remote:
Press REC ( ¦ ) and PLAY ( 3 ) at the same time.
NOTE:
Be sure to select “AUTO” for “PICTURE CONTROL” (or “NORM” when “VIDEO CALIBRATION” is set to “OFF”) after you finish dubbing the tapes (☞ pg. 37 and 38).