JVC SR-V10U manual Tuner Setting, Access Tuner Set screen, Perform Auto Channel Set

EN 13

Tuner Setting

Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.

1 2 3

2

4 5 6

7 8 9

0 4

1

14 23 23

Setting channels

automatically — Auto Channel Set

Use Auto Channel Set only if channels have not been set correctly by the Plug & Play setting. If you want to add or delete channels, use Manual Channel Set (☞ pg. 14).

1Access Main Menu screen

Press MENU.

2Access Tuner Set screen

Press SHUTTLE PLUS	MAIN MENU
%Þ to move the	FUNCTION SET
highlight bar (arrow) to	=TUNER SET
“TUNER SET”, then	INITIAL SET
press OK or SHUTTLE
PLUS #.
	PRESS (5,°), THEN (OK)
	PRESS (MENU) TO END

3Perform Auto Channel Set

You can automatically	TUNER SET
set the receivable	BAND	CATV
channels in your area in
	=AUTO CHANNEL SET
the order of their	MANUAL CHANNEL SET
frequencies.
Press SHUTTLE PLUS
	SELECT WITH (5,°) AND (OK)
%Þ to move the	PRESS (MENU) TO END
highlight bar (arrow) to	AUTO CHANNEL SET
“AUTO CHANNEL
SET”, then press OK or
SHUTTLE PLUS #.	SCANNING...

PRESS (MENU) TO END

NOTES:

●When Auto Channel Set is complete, “SCAN COMPLETED” appears on screen.

●If the scan was unsuccessful, “SCAN COMPLETED– NO SIGNAL” appears on screen. Check the connections and start again.

4Return to normal screen

Press MENU.

INFORMATION

The VCR selects the correct band (TV or CATV) automatically during Auto Channel Set.

The selected band will be displayed on the right side of “BAND” on the Tuner Set screen.