JVC SR-V10U manual Express Timer Programing, 32 EN

32 EN TIMER RECORDING (cont.)

Express Timer Programing

Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.

You can directly program the VCR’s timer to record up to 8 programmes, as far as a year in advance. Remember, the clock must be set before you can program the timer (☞ pg. 8 or 10).

1 Load a cassette

Make sure the record safety tab is intact. If not, set "REC SAFETY" to "OFF" ( ☞ pg. 37, 41).

●The VCR turns on, and the counter is reset, automatically.

●You can also record onto a cassette without a record safety tab by covering the hole with adhesive tape before inserting the cassette.

2Access PlusCode No. screen

Press PROG..

	1
DAILY	4
	7
34
5
29	1

POWER

2 3

2

5	6
8	9	WEEKLY

0 40

7

6 8

3Access Program screen

Press START +/– once.	PROGRAM 1
(If no program is stored,	START		STOP
“PROGRAM 1”
	– –:– –AM	=	– –:– –AM
appears.)	DATE		CH
	– –/– –/– –		– – –	SP

PRESS (+/–, SP/EP, 8=DAILY,

9=WEEKLY), THEN (0K) PRESS (PROG.) TO END

	Set program start time
4 Press START +/–		PROGRAM 1
	repeatedly to enter the	START		STOP
	time you want
		8:00 AM	=	– –:– –AM
	recording to start.	DATE		CH
		– –/– –/– –		– – –	SP
	● Press and hold START

9

+/– to increase the	PRESS (+/–, SP/EP, 8=DAILY,
	9=WEEKLY), THEN (0K)

time in 30-minute	PRESS (PROG.) TO END
intervals.

5 Set program stop time

Press STOP +/– repeatedly to enter the time you want recording to stop.

●Press and hold STOP +/– to increase the time in 30-minute intervals.

6 Set program date

Press DATE +/–. (The current date is displayed on the screen. The date you enter appears in its place.)

7Set channel number

Press CH +/–.

●Holding down CH +/– rapidly changes the channel numbers.

●If you receive your programs through a cable box, select the cable box output channel — the channel on which you view the cable box programs on the TV.