Basic operations
The basic operations for this system are as follows.
IMPORTANT
Check that remote control mode selector is set to the current position when using the primary remote control:
Set to “AUDIO/TV/VCR” to operate an audio system, TV, or VCR. Set to “CATV/DBS” to operate a CATV converter or DBS tuner. The system will not operate normally while in CATV/DBS mode.
To turn the system power supply
ON and OFF (standby)
From the remote controls:
Primary remote control | Secondary remote control | ||||||
|
|
|
|
|
|
|
|
AUDIO POWER | AUDIO POWER |
Press AUDIO POWER to turn power ON.
The STANDBY lamp goes off, and the current source name (or station frequency) appears on the display window
The center unit POWER button and 0button will light up blue.
Press AUDIO POWER again to turn power OFF (standby).
The STANDBY lamp is lit.
On the front panel:
STANDBY lamp
POWER
To turn TV power ON and OFF
JVC TVs may be used as is with the primary and secondary remote controls. TVs from other manufacturers require changes to the transmittable signals before they can be used with the primary and secondary remote controls. See page 57 for details of changing the transmittable signals.
From the remote controls: |
|
Primary remote control | Secondary remote control |
TV/CATV/DBS POWER | TV POWER |
|
Press TV/CATV/DBS POWER (or TV POWER) to turn power ON.
Press TV/CATV/DBS POWER (or TV POWER) again to turn power OFF.
Adjusting volume
The volume level can be adjusted within the range of “0” (minimum) to “80” (maximum).
Common: |
|
Primary remote control | Secondary remote control |
Press POWER to turn power ON.
The STANDBY lamp goes off, and the current source name (or station frequency) appears on the display window.
The center unit POWER button and 0button will light up blue.
Press POWER again to turn power OFF (standby).
The STANDBY lamp is lit.
Notes:
•The powered
•A small amount of power is consumed in the standby mode. Remove both AC power cords from the AC outlets to turn the center unit and powered
VOLUME + /– | VOLUME + /– |
On the front panel
VOLUME + /–
Press VOLUME + or –.
Press VOLUME + to increase volume.
Press VOLUME – to decrease volume.
CAUTION:
Always set the volume to the minimum before starting any source. If the volume is set at its high level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your speakers.
16