How do I attach non-slip rubbers to the center speaker?

To attach non-slip rubbers to the center speaker, follow the instructions provided in the manual. Ensure to peel off the seal before applying the rubbers and attach them at the designated points.

What should I consider when hanging satellite speakers from the wall?

When hanging satellite speakers from the wall, it's important to have the brackets attached by a qualified person to avoid any unexpected damage. Carefully select the location for attachment to avoid interference with daily activities.

How can I adjust the angle of the satellite speakers?

You can adjust the angle of the satellite speakers in the front-rear and left-right directions along the channel in the bracket. Simply follow the instructions provided in the manual to ensure proper adjustment without causing any damage.

Installation, To hang satellite speakers from the wall

Installation

To attach non-slip rubbers to the center

speaker

Attach the supplied non-slip rubbers at three points on the bottom of the center speaker.

The non-slip rubbers are adhesive.

Peel off the seal before applying.

Attach non-slip rubbers at the three points shown in the diagram.

Attach two rubbers at left and right at the front of the speaker, and one in the middle at the rear.

1 cm (7/16”) 5 cm (2”) Non-slip rubber

Front side

Bottom

Example ——————————————————

Satellite speaker	Center speaker
(front left speaker)	Center speaker
	TV

Powered sub-woofer

Center unit

Satellite speaker (front right speaker)

Satellite speaker

Satellite speaker(rear right speaker) (rear left speaker)

The rear speakers are placed behind the listening position.

CAUTIONS:

•For safety reasons, always ensure that there is sufficient place behind the powered sub-woofer.

•If the front and rear speakers are placed on the floor, always ensure that they are level.

To hang satellite speakers from the wall

Use the supplied bracket to fix satellite speakers to the wall.

CAUTION: ATTACHING THE BRACKETS ON THE WALL

When attaching the brackets on the wall, have them attached to the wall by a qualified person.

DO NOT attach the brackets on the wall by yourself to avoid an unexpected damage of their falling from the wall, caused by incorrect attachment or weakness in the wall.

Location of attachment to wall:

Care is required in selecting a location for attaching satellite speakers to the wall. Injury to personnel, or damage to equipment, may result if the speakers are attached in a location which interferes with daily activities.

Attaching speakers to the bracket ————————

1. Use the screw supplied to attach the speaker to the bracket.

Bracket

Screw

2. Adjusting the angle of the satellite speakers

The angle of the speaker may be adjusted in the front-rear and left-right directions along the channel in the bracket.

When adjusting the angle, loosen the screw slightly, make the adjustment, and then tighten the screw firmly.

Tilting the speaker to the front

CAUTION:

If the screw is not tightened firmly, it may cause injury to personnel or damage to equipment.

JVC TH-A10 manual Installation, To hang satellite speakers from the wall, Bottom, Center unit

Models: TH-A10