JVC TH-A10 Resuming playback, Selecting playback from the DVD menu, Using the DVD player, Resume

Using the DVD player

On the front panel:

4, ¢

Press ¢or 4.

Press 4to locate the beginning of the current chapter, title, or track, and press ¢to locate the beginning of the next chapter, title, or track.

Note:

•When you play a Video CD disc with PBC function or a DVD disc, the unit may locate different place, but it will generally locate the beginning of the title or chapter or track.

Resuming playback

The unit stores the position on a disc where you want to interrupt playback at, and resumes playback from that position later.

To store the playback position —————————

Primary remote control only:

RESUME

Press RESUME during playback.

The unit stores the position at which RESUME is pressed, and the RESUME indicator in the display window is lit. The last stored memory overrides the previous memory.

Note:

•The interrupted position is stored even when AUDIO POWER on the remote control, or POWER on the center unit, are pressed to switch power OFF (standby), instead of pressing RESUME.

To resume playback from the stored position ———

Press RESUME while paused.

Playback begins from the stored position.

•The unit will also resume playback when RESUME is pressed in the standby mode.

Note:

•When you press RESUME during playback of a Video CD disc with the PBC function, the unit may resume playback from a point slightly earlier than the resume point you stored.

To clear the stored position

Open the disc tray.

The RESUME indicator in the display window goes off.

Selecting playback from the DVD menu

DVD discs generally have their own menus which show the disc contents. These menus contain various items such as titles of a movie, names or songs, or artist information, and display them on the TV screen.

You can locate a desired scene by using the menu.

7Insert the DVD disc.

From the remote controls:

Primary remote control Secondary remote control

1		2	1	2
1.
	Press MENU or TITLE.		Example
	The menu appears on the TV
	screen.
	•	TITLE not on secondary
		remote control.

2. Use CURSOR 2/3/5/∞to select a desired item, then press ENTER.

The unit starts playback of the selected item.

•With some discs, you can also select items by entering the corresponding number using the number buttons, which may cause the unit to automatically start playback.

About menu

Normally, a DVD disc which contains more than one title may have a “title” menu which lists the titles. In this case, the menu appears on the TV screen by pressing TITLE . Some DVD discs may also have a different menu which appears by pressing MENU.

See the instructions of each DVD disc for its particular menu.

Notes:

•When appears on the TV screen by pressing TITLE in step 1:

The disc does not have a menu listing the titles.

•When appears on the TV screen by pressing MENU in step 1:

The disc does not have a menu.

24