Others

About White-spot correction

As a general characteristic unique to CCDs, white-spots may appear on the screen with age. In order to reduce this phenomenon, this unit is equipped with a white-spot correction feature.

Usage

Switch on the camera power supply and wait for at least 30 minutes.

1. Remove the dome cover.

2. Cover the lens surface using a black sheet of paper, etc. so that light does not enter the lens.

3. Press and hold the SPOT CORRECTION button on the unit for more than 2 seconds.

¥ White-spot correction will start. Correction may take several seconds for completion.

Memo:

¥The white-spot correction feature of this unit does not guarantee the correction of all white spots.

Maximum correction: less than 16 ~ 32 spots

Depending on the characteristic of white spots, correction may not be possible.

¥When performing white-spot correction, accurate data may not be achieved in case of highly-detailed pixels since correction is made using the information of surrounding pixels.

¥The result of white-spot correction is maintained until the next correction is performed.

E-16

Page 18
Image 18
JVC TK-C205 manual Others, About White-spot correction, Usage, Memo