Introduction
Safety Precautions
●Installation of this unit requires expertise. Please contact your dealer for details.
●The ceiling to mount the camera has to be strong enough to support the weight of this product.
If the ceiling is not strong enough, make sure to apply reinforcement to the ceiling before installation.
●Be sure to tighten the screws and nuts se- curely, Insufficient tightening may cause the unit to fall from its mount.
●The unit is to be powered by a DC 12 V or an AC 24 V power supply.
The AC 24 V power supply should conform to the following:
Class 2 only (U type)
Isolated power supply only (E type)
●The rating label is displayed on the under- side of the body.
●JVC will not be liable for any damage re- sulting from the camera dropping due to incomplete installation by not following the installation instructions.Take caution when performing installation.
●Before starting an important recording, be sure to perform a test recording in order to confirm that a normal recording is possible.
●We do not accept liability for the loss of a recording in the case of it becoming impossible to record due to a problem in the video camera, VCR or video tape.
●We do not accept liability for any damage to the camera in cases when it is dropped because of incomplete installation due to not observing the installation instructions correctly. Please be careful when installing the camera.
