LOADING AND UNLOADING A VIDEO CASSETTE
Use only video cassette tapes marked 
and 
.
LOADING
Push the center of the tape until it is automatically retracted into the TV/VCR.
AUTOMATIC POWER ON AND PLAY
When loading a cassette tape without the erase prevention tab intact, the TV/VCR will turn on automatically and playback will start immediately.
Insert the cassette with its labeled side facing you.
An inverted video cassette cannot be inserted.
UNLOADING
1 | To unload a video cassette, press the STOP/ |
EJECT button on the TV/VCR twice. The first | |
press will stop the tape in any mode.The second |
press will eject the tape.
STOP/EJECT
AUTOMATIC EJECT
If the TV/VCR automatically rewinds the tape to the beginning (AUTO REWIND FEATURE), the tape will be ejected automatically. (See NOTE on page 38.)
2 Pull the cassette out.
NOTE: • Always eject the tape when not in use.
•The cassette tape can be ejected even if the POWER is “OFF”.
TO PREVENT ACCIDENTAL ERASURE
After recording, break off the erase prevention tab if you do not wish to record over the tape.
Screwdriver
TO RECORD AGAIN
Cover the hole with vinyl tape.
Be careful the tape does not extend past the edges of the video cassette housing.
Erase prevention tab
Adhesive tape
TAPE SPEED AND MAXIMUM RECORDING TIME
TAPE SPEED
VIDEO CASETTE TAPE
SP (Standard Play)
2 hours
1 hour
30 minutes
EP (Extended Play)
8 hours
6 hours
3 hours
32
