Cisco Systems 7609 manual Installing the L Brackets and Cable Guides

Chapter 3 Installing the Cisco 7609 Internet Router

Installing the Rack-Mount Kit

Installing the L Brackets and Cable Guides

The Cisco 7609 Internet Router L bracket screw holes are stamped + and –. You can install the brackets either on the left or right side of the chassis; use the + holes on one side and the – holes on the other side. The L brackets are installed with eight M4 Phillips countersunk-head screws (four screws on each side).

The optional cable guide installs on the front of the chassis and is secured with four M3 screws.

Step 1 Position one of the L brackets against the Cisco 7609 chassis side and align the screw holes (use either the + or the – holes).

Step 2 Secure the L bracket to the Cisco 7609 chassis with the four M4 screws.

Step 3 Repeat Steps 1 and 2 for the other L bracket. If you used the + set of holes for the first L bracket, use the – set of holes for the second L bracket.

If you want to install the optional cable guide, perform these steps:

Step 1 Position the cable guide against the front of the chassis and align the four screw holes as shown in Figure 3-3.

Step 2 Secure the cable guide with four M4 screws.

	Cisco 7609 Internet Router Installation Guide
3-6	OL-5079-04