Cisco Systems 7609 manual Installing the Stabilizer Kit, Quantity Part Description Received

Chapter 3 Installing the Cisco 7609 Internet Router

Installing the Stabilizer Kit

Installing the Stabilizer Kit

Note The stabilizer kit is included only in the accessory kits for the Cisco 7609 Internet Router.

If you are not installing the Cisco 7609 Internet Router in a rack, you must install stabilizer brackets to the bottom of the chassis. The stabilizer brackets reduce the possibility that the freestanding chassis will tip over.

Open the stabilizer kit package and use the kit contents list in Table 3-2to verify that all parts are included.

Table 3-2 Stabilizer Kit Contents

Quantity	Part Description	Received
16	M4 Phillips countersunk-head screws
2	Stabilizer brackets

Note Have a second person available to perform this procedure.

To install the stabilizer brackets, perform these steps:

Step 1 Have one person tilt and hold the chassis to one side.

Step 2 With the chassis tilted, attach the stabilizer bracket to the side of the chassis with the eight M4 screws as shown in Figure 3-5.

	Cisco 7609 Internet Router Installation Guide
3-10	OL-5079-04