Cisco Systems 7609 manual AC-Input Power Supply

Chapter 1 Product Overview

Cisco 7600 Internet Router Components

The Cisco 7609 Internet Router supports redundant AC-input and DC-input power supplies.

Each power supply has an individual power switch.

The AC-input power supply (see Figure 1-3) has a detachable power cord (except for the WS-CAC-4000W) that allows you to connect each power supply to the site power source. You can connect the DC-input power supply (see Figure 1-4) to the power source with heavy gauge wiring connected to a terminal block.

Note The power cord is not shown in Figure 1-3.

Both AC-input and DC-input power supplies support redundancy. When power is removed from one supply, the redundant power feature causes the second supply to produce full power.

Note If you run the 2500W power supply at the low range input (100 to 120VAC), it is not redundant in a fully populated Cisco 7609 Internet Router.

For complete power specifications, see Appendix A, “Technical Specifications.”

Figure 1-3 AC-Input Power Supply

AC power

connection

Cable retention

device

I

0

Power switch

16029

INPUT	FAN	OUTPUT
OK	OK	FAIL

Status LEDs

Captive installation

screw

	Cisco 7609 Internet Router Installation Guide
1-10	OL-5079-04