LOCATION OF CONTROLS
FRONT | REAR |
1
REC / OTR | REW | PLAY | FF | STOP/EJECT |
PHONES VIDEO – IN – AUDIO
INPUT SP/EP | – CHANNEL | + | – VOLUME + | REC REC TIMER ON TIMER |
|
|
|
|
|
|
|
| POWER |
|
| ANT |
|
| 2 |
|
| 3 |
| 4 |
| 5 |
| 6 | 18 | 19 |
|
| REC / ITR |
| REW | PLAY | FF |
| STOP/EJECT |
|
|
| |
| PHONES VIDEO – IN – AUDIO | INPUT | SP/EP |
|
|
|
|
|
|
|
| |
|
|
| – CHANNEL + | – VOLUME + | REC REC TIMER ON TIMER |
|
|
| ||||
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| POWER |
|
|
|
7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 |
| |
DESCRIPTION OF CONTROLS
FRONT:
1.Cassette Loading Slot - To insert or remove a video tape.
2.REC / ITR Button - Press once to start normal recording. Additional presses activate Instant Timer Recording.
3.REW (Rewind) Button - In the Stop mode, this button rapidly winds the tape backwards. In the Play mode, this button activates reverse search.
4.PLAY Button - Press to play a prerecorded tape.
5.FF (Fast Forward) Button - In the Stop mode, this button rapidly winds the tape forward. In the Play mode, this button activates forward search.
6.STOP/EJECT Button - Press once to stop the tape in any mode. Press again to eject the tape.
7.Headphone Jack - Plug monaural headphones or an earphone with an 1/8" miniplug into this jack for private listening.
8.AUDIO/VIDEO IN Jacks - Audio and video signal cables from an external source can be connected here.
9.INPUT Selector Button - Switches the program for viewing between the VCR and an external input source.
10.SP/EP Selector Button - Sets the tape speed for
8 recording.
11.CHANNEL + / – Buttons - Press to select a channel for viewing or recording.
12.VOLUME + / – Buttons - Press to raise or lower the volume of the sound.
13.REC Indicator - Lights when the TV/VCR is record- ing.
14.REC TIMER Indicator - This lights when the TIMER button is pressed.
15.ON TIMER Indicator - This indicator lights up when the powered up. It also lights up when ON TIMER program is turned ON while power is OFF.
16.POWER Button - Press to turn the TV/VCR on or off.
17.Remote Sensor - Signals from the Remote Control are received here.
REAR:
18.VHF/UHF Antenna Jack - Connect the 75 ohm coaxial cable from the antenna or Cable TV service to this jack.
