JVC UX-A70MD manual Putting the Batteries into the Remote Control, English

English

NOW, you can plug in the unit and other connected equipment FINALLY!

SPEAKER IMPEDANCE

MIN 4Ω

AC power cord

110V

ANTENNA	VOLTAGE	127V	(supplied)
AM EXT	SELECTOR
AM LOOP		230V

FM(75Ω)

COAXIAL

AC IN

1 To the AC IN terminal

2 To a wall outlet

If the wall outlet does not match the AC Plug, use the supplied AC plug adaptor.

When connecting the AC power cord into a wall outlet, the unit automatically starts display demonstration.

To stop and cancel the display demonstration, press

COLOR during display demonstration while the unit is turned off.

To start the display demonstration manually, press

COLOR while the unit is turned off.

•Each time you press the button, the display demonstration alternates between on and off.

Putting the Batteries into the Remote Control

Insert the batteries — R6P(SUM-3)/AA(15F) — into the remote control, by matching the polarity (+ and –) on the batteries with the + and – marking on the battery compartment.

When the remote control can no longer operate the unit, replace both batteries at the same time.

1

2

R6P(SUM-3)/AA(15F)

3

•DO NOT use an old battery together with a new one.

•DO NOT use different types of batteries together.

•DO NOT expose batteries to heat or flame.

•DO NOT leave the batteries in the battery compartment when you are not going to use the remote control for an extended period of time. Otherwise, it will be damaged from battery leakage.

– 9 –