JVC UX-A70MD manual Basic CD Operations, To stop playback for a moment, To go to another track

Playing Back the Entire CD — Normal Play

You can play a CD.

1 Press CD OPEN/CLOSE 0.

The unit automatically turns on, the electronic swing panel slides upward, then the disc tray comes out.

Electronic swing panel

Disc tray

2 Place a CD correctly on the circle of the disc tray with its label side up.

Good No good

•When using a CD single (8 cm), place it on the inner circle of the disc tray.

3 Press CD #/ 8.

The disc tray closes, then the electronic swing panel slides downward automatically.

The CD indicators start flashing on the display and CD playback starts from the first track of the CD.

•If you press CD OPEN/CLOSE 0 again, the disc tray and electronic swing panel close, but CD playback does not start.

Track number indicator

TRACK	1	2	3	4	5	6	7	8	9	10	11	12
			MD				CD					Flashing
The current track										Elapsed playing time

Ex. The CD has 12 tracks and the unit is playing the first track.

•All the track numbers light when the currently loaded CD has more than 15 tracks.

•When the unit finishes playing a track, its track number goes off from the track number indicator on the display.

CD playback stops after playing back all the tracks of the CD.

To stop during play, press 7.

All the tracks on the CD

TRACK 1 2 3 4 5 6 7 8 9 10 11 12

MDCD

Total track number Total playing time

Ex. The CD playback stops. The CD has 12 tracks.

To remove the disc, press CD OPEN/CLOSE 0.

Basic CD Operations

While playing a CD, you can do the following operations.

To stop playback for a moment

Press CD #/ 8.

The CD indicators light on the display and the elapsed playing time starts flashing in the main display.

To resume playback, press CD #/ 8again.

To locate a particular point in a track during play

Press and hold ¢ or 4.

•¢: Fast-forwards the tracks.

•4: Fast-reverses the tracks.

To go to another track

Press ¢ or 4repeatedly.

•¢: Skips to the beginning of the next or succeeding tracks.

•4: Goes back to the beginning of the current or previous track.

To go to another track directly using the number buttons (on the remote control ONLY)

Pressing the number button(s) allows you to start playing the track number you want.

Ex.: For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 32, press +10, +10, +10, then 2.

English

– 18 –