Getting Started
Continued
Unpacking | Connecting Antennas |
|
|
English
After unpacking, check to be sure that you have all the following items.
The number in the parenthesis indicates the quantity of the pieces supplied.
•FM antenna (1)
•AM loop antenna (1)
•AC power cord (1)
•Remote control (1)
•Batteries (2)
•Spacers (2)
•AC Plug Adaptor (1) — except for Hong Kong
If any is missing, consult your dealer immediately.
Adjusting the Voltage Selector
Before plugging in the unit, set the correct voltage for your area with the voltage selector on the rear of the unit.
|
| 110V |
|
|
ANTENNA | VOLTAGE | 127V | Voltage arrow | |
AM EXT | SELECTOR |
| ||
AM LOOP |
| 230V |
|
|
FM(75Ω) |
|
|
|
|
COAXIAL |
|
|
|
|
|
|
|
| 110V |
| VOLTAGE | 127V | ||
| SELECTOR | |||
|
| |||
|
|
|
| 230V |
Use a screwdriver to rotate the voltage selector so the voltage number the voltage arrow is pointing at is the same as the voltage where you are plugging in the unit.
DO NOT plug in before setting the voltage selector on the rear of the unit and all connection procedures are complete.
FM antenna
FM antenna (supplied)
1Attach the FM antenna to the FM (75 Ω) COAXIAL terminal.
2Extend the FM antenna.
3Fasten it up in the position which gives you the best reception.
About the supplied FM antenna
The FM antenna supplied with this unit can be used as temporary measure. If reception is poor, you can connect an outdoor FM antenna.
To connect an outdoor FM antenna
Before connecting it, disconnect the supplied FM antenna.
Outdoor FM antenna (not supplied)
A 75Ω antenna with coaxial type connector (DIN 45325) should be used.