JVC UX-A70MD manual Basic MD Operations, To change the information in the main display

English

Basic MD Operations

While playing an MD, you can do the following operations.

To stop playback for a moment

Press MD # / 8.

The MD indicators lights on the display and the elapsed playing time starts flashing in the main display.

To resume playback, press MD # / 8 again.

To locate a particular point in a track during play

Press and hold ¢or 4.

•¢ : Fast-forwards the tracks.

•4 : Fast-reverses the tracks.

To go to another track

Press ¢or 4repeatedly.

•¢ : Skips to the beginning of the next or succeeding tracks.

•4 : Goes back to the beginning of the current or previous tracks.

To go to another track directly using the number buttons (on the remote control ONLY)

Pressing the number button(s) allows you to start playing the track number you want.

Ex.: For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 32, press +10, +10, +10, then 2.

To change the information in the main display

On the remote control ONLY:

Each time you press DISPLAY/CHARA, the information on the loaded MD changes as follows:

When you press DISPLAY/CHARA while playing or pausing:

The current track number and elapsed playing time = Track title* = Remaining recording time =

The clock time** = (back to the beginning)

When you press DISPLAY/CHARA when the MD recorder stops:

The total track number and total playing time = Disk title* = Remaining recording time = The clock time** = (back to the beginning)

*When track or disk has a title.

**“0:00” appears in the main display, before you set the built-in clock (see page 39.)

Programing the Playing Order of the Tracks

— Program Play

You can arrange the order in which the tracks play before you start playing. You can program up to 32 tracks.

On the remote control ONLY:

1 Load an MD.

2 Press MD # / 8, then 7.

The source is changed to “MD.”

3 Press PLAY MODE so that “MD PROGRAM” appears in the main display.

The PRGM indicator also lights.

•Each time you press the button, play mode changes as follows:

MD PROGRAM MD RANDOM

Total track number & total playing time

(Normal Play)

4 Press the number buttons to select the tracks.

•For how to use the number buttons, see “To go to another track directly using the number buttons (on the remote control ONLY)” to the left.

The selected track numbers

TRACK 5 7 9

MDCD

PRGM

The current track Step No.

Ex. Tracks 5, 7, and 9 have been programed.

•If you stop pressing the buttons for a while, the total playing time will appear in the main display. However, you can continue selecting the tracks.

5 Press MD # / 8.

The tracks are played in the order you have programed.

To stop during play, press 7.

The last programed track number and total playing time appear in the main display.

To exit from Program play mode, press PLAY MODE once or twice so that the unit enters another playback mode (Normal play or Random play mode) before or after play.

To check the program contents

Before playing, you can check the program contents by pressing 4or ¢.

•4: Shows the programed tracks in the reverse order.

•¢: Shows them in the programed order.

– 23 –