JVC UX-A70MD manual Connecting Other Equipment, To connect speakers, English

Continued

English

To connect speakers

You can connect the speakers using the speaker cords.

1
2	Speaker terminals		3,4
		Red
Speaker cord	+	+	Speaker cord
	R	L
	-	-
		Black
	R		L
Rear of the right		Rear of the left
speaker		speaker

Connecting Other Equipment

You can connect the following equipment which can be used as a playback and recording device. By using the cassette deck, for example, you can record any source played back on this unit.

When you connect and use the equipment, refer also to its manual supplied.

•DO NOT connect other equipment while the power is on.

•DO NOT plug in any equipment until all connections are complete.

To connect another component such as a cassette deck

Be sure that the plugs of the audio cords and the jacks on the rear of the unit are color-coded: White plugs and jacks are for left audio signals, and red ones for right audio signals.

To output (PLAY)

Ex. Cassette deck

To input (REC)

1	If cords are covered with insulation, twist the core
	of the cord at the end of each cord, then remove the
	insulation.
2	Open the speaker terminal.
3	Insert the end of the speaker cord to the terminal.
	Match the polarity of the speaker terminals: White (+)
	to red (+) and black (–) to black (–).

ANTENNA

AM EXT

AM LOOP

FM(75Ω)

COAXIAL

–

110V

VOLTAGE

127V

SELECTOR

230V

4 Close the speaker terminal on the rear of the unit.

Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.

By using audio cords (not supplied), connect:

•Between the audio input jacks on the cassette deck and the LINE OUT jacks — For recording on the cassette deck.

•Between the audio output jacks on the cassette deck and the LINE IN jacks — For playing a tape.

– 8 –