Contents | JVC VN-C215V4U specification

Contents
Introduction
Safety Precautions	2
Main Features	6
Contents	7
Operating Environment	8
Cautionary Notes	8
Name and Function of Parts	10
Features	14
Setup
Overall Procedures	16
Mounting the Camera	16
Before Mounting	16
Mounting on a ceiling	17
Mounting the camera directly on a
ceiling or alongside a wall	20
Mount by allowing the cable to exit
from the side	22
Mounting the camera
to the electrical box	22
Power Connection	24
Using the PoE	24
Connecting to the DC12 V
power supply	25
LAN Cable Connection	26
Alarm Input/Output
Cable Connection	26
Image adjustment	27
Mounting the Dome Cover	29

Setting
Network Requirements	30
IP Address Settings	31
T For ASetting Using Internet
ExplorerB, please refer to the
[INSTRUCTIONS] (pdf) in the
supplied CD-ROM.
Operation
Operation of Built-in Viewer	37
Setting Up the Internet Explorer ....	38
Installing the built-in viewer	40
Screen Configuration of Built-in
Viewer	41
Quitting the Built-in Viewer	42
Shortcut for Built-in Viewer	43
Others
Specifications	44

7

Image 7

JVC VN-C215V4U manual Contents

Contents

Fixed IP Dome Camera VN-C215V4USTART-UP Guide Important Safeguards Safety Precautions For USA and Canada Dear Customer Business users Other Countries outside the European UnionSehr geehrter Kunde, sehr geehrte Kundin Page Main Features Contents Operating Environment Saving Energy MaintenanceOthers Copyrights of video Camera unit Name and Function of Parts Strap Power supply/Alarm signal cable a PgReset Reset button Camera unit/Inside the camera Inside the camera Lens section Iris Level Iris level adjustment dialFocus adjustment ring Zoom adjustment ring Saving Jpeg images to the FTP server at regular intervals FeaturesAlarm Monitoring Via Built-in Viewer Control via customized application software Restrictions on Clients Mounting the Camera Overall Procedures Mounting on a ceiling SetupSelecting Mounting Method Mounting Method Loosen the pan fastening screw ConnectionRemove the inner dome Remove the outer case Mounting Image adjustment Mounting the Dome Cover Fall-prevention wire is not supplied Configure image settings. a PgHitch the fall-prevention wire that was Mount the fall-prevention wire on Tighten the Camera Fastening Screws and secure the camera Turn the camera in the clockwise directionWind the waterproof tape. a Pg Mount by allowing the cable to exit from the side ConnectingMounting the camera to the electrical box Mounting Using the PoE Power ConnectionWhat is PoE Power over Ethernet? About the power cable Connecting to the DC12 V power supply120 190 LAN Cable Connection Alarm Input/Output Cable Connection When connecting to a hub When connecting to a computer Image adjustment Adjusting field angle, focus and brightness Adjusting the camera shooting direction Mounting the Dome Cover Field angle adjustmentFocus adjustment Brightness adjustment Network Requirements a Assigning an IP address from the Dhcp server IP Address SettingsSetting IP address with the default VN- C215V4U settings System configuration required for setting IP address Click Start IP Address setting at the computerClick OK on the Local Area Connection Properties screen Example http//192.168.0.2 Enter the user name and password login as an administrator Top page of VN-C215V4U appears Basic page with the IP address settings appears When the IP address of VN-C215V4U is unknown When the IP address of VN-C215V4U is known Operation of Built-in Viewer Setting Up the Internet Explorer Http//192.168.0.2 Http//192.168.0.2/cgi-bin/c215viewing.cgi Installing the built-in viewerEnter the user name and password Viewer is installed and launched Screen Configuration of Built-in Viewer Quitting the Built-in Viewer Enter the URL of the built-in viewer in the URL field Shortcut for Built-in Viewer General SpecificationsLAN Specifications Attachments/Accessories SR55 Dimension Unit mminchesPage Page Camera