Operation of Built-in Viewer | JVC VN-C215V4U specification

Operation

Operation of Built-in Viewer

Using the built-in viewer enables display of a series of images, one-shot recording of images and receiving of alarm information.

Setting Up the Internet Explorer (A Pg. 38) Installing the built-in viewer

(A Pg. 40)

Screen Configuration of Built-in Viewer (A Pg. 41)

Quitting the Built-in Viewer (A Pg. 42) Shortcut for Built-in Viewer (A Pg. 44)

●For A Built-in Viewer SettingsB please refer to the[INSTRUCTIONS] (pdf) in the supplied CD-ROM.

37

Image 37

JVC VN-C215V4U manual Operation of Built-in Viewer

Contents

Fixed IP Dome Camera VN-C215V4USTART-UP Guide Important Safeguards Safety Precautions For USA and Canada Dear Customer Business users Other Countries outside the European UnionSehr geehrter Kunde, sehr geehrte Kundin Page Main Features Contents Operating Environment Others MaintenanceCopyrights of video Saving Energy Camera unit Name and Function of Parts Reset Reset button Power supply/Alarm signal cable a PgCamera unit/Inside the camera Strap Inside the camera Focus adjustment ring Iris Level Iris level adjustment dialZoom adjustment ring Lens section Alarm FeaturesMonitoring Via Built-in Viewer Saving Jpeg images to the FTP server at regular intervals Control via customized application software Restrictions on Clients Mounting the Camera Overall Procedures Selecting Mounting Method SetupMounting Method Mounting on a ceiling Remove the inner dome ConnectionRemove the outer case Loosen the pan fastening screw Mounting Image adjustment Mounting the Dome Cover Hitch the fall-prevention wire that was Configure image settings. a PgMount the fall-prevention wire on Fall-prevention wire is not supplied Tighten the Camera Fastening Screws and secure the camera Turn the camera in the clockwise directionWind the waterproof tape. a Pg Mount by allowing the cable to exit from the side ConnectingMounting the camera to the electrical box Mounting Using the PoE Power ConnectionWhat is PoE Power over Ethernet? About the power cable Connecting to the DC12 V power supply120 190 When connecting to a hub Alarm Input/Output Cable Connection When connecting to a computer LAN Cable Connection Image adjustment Adjusting field angle, focus and brightness Adjusting the camera shooting direction Focus adjustment Field angle adjustmentBrightness adjustment Mounting the Dome Cover Network Requirements Setting IP address with the default VN- C215V4U settings IP Address Settings System configuration required for setting IP address a Assigning an IP address from the Dhcp server Click Start IP Address setting at the computerClick OK on the Local Area Connection Properties screen Example http//192.168.0.2 Enter the user name and password login as an administrator Top page of VN-C215V4U appears Basic page with the IP address settings appears When the IP address of VN-C215V4U is unknown When the IP address of VN-C215V4U is known Operation of Built-in Viewer Setting Up the Internet Explorer Http//192.168.0.2 Enter the user name and password Installing the built-in viewerViewer is installed and launched Http//192.168.0.2/cgi-bin/c215viewing.cgi Screen Configuration of Built-in Viewer Quitting the Built-in Viewer Enter the URL of the built-in viewer in the URL field Shortcut for Built-in Viewer LAN Specifications SpecificationsAttachments/Accessories General SR55 Dimension Unit mminchesPage Page Camera