OFFHOLDON
HOLD
Preventing Acci- dental Operation (HOLD)
The HOLD switch on the unit/remote control is prepared to prevent an accidental operation by an unexpected but- ton press.
Setting the HOLD switch ON prevents the fol- lowing:
•Powering on the unit accidentally (which can cause the batteries to go dead).
•Play being cut off unexpectedly.
•Unexpected operation during play. (Set the HOLD switch to the ON position after you start playing disc.)
To set the unit/remote control in HOLD mode
•Set the HOLD switch on the unit/remote control to the ON position. The all buttons on the unit/remote control are disabled.
“HOLD ” indication
When the unit is in HOLD mode, “HOLD” will be displayed if a button on the unit is pressed.
To release the HOLD mode
Set the HOLD switch to OFF position.
Notes:
•Before turning on the unit, be sure that HOLD is OFF. Otherwise, you cannot turn on the unit.
•The HOLD switch on the unit is effective for the unit only. While, that on the remote control is effective for the remote control only.
9
