JVC XV-D9000 manual Setting Up the Initial Settings

Initial Settings

●Before using the player, set up the Initial Settings to match your system configu- ration.

●You can set up the Initial Settings while a disc is stopped or there is no disc loaded in the player.

●You can perform these operations from the remote control.

The Initial Settings screen consists of the following three screens.

•Initial Settings 1, Initial Settings 2

These settings are used to set up the settings for playing DVD Audio and DVD Video discs.

•Speaker Settings

These settings are used to adjust the settings to match the speakers connected to the player.

Setting Up the Initial Settings

1Remove the disc from the disc tray.

• Or stop the disc.

2Press [SET UP].

The Initial Settings screen is displayed.

To switch between the various Initial Settings screens, press 2/3 to align the arrow ( ) with the tab.

Initial Settings 1 Initial Settings 2 Speaker Settings

PREFERENCE1	PREFERENCE2	SPK.SETTING
MENU		ENGLISH
AUDIO		ENGLISH
SUBTITLE		ENGLISH	j
ON SCREEN		ENGLISH
GUIDE		ON
MONITOR TYPE		4:3LB
PRESS	KEY

PREFERENCE1	PREFERENCE2	SPK.SETTING
DIGITAL OUT		PCM ONLY
DOWN MIX		OFF
COMPRESSION		OFF	j
SCREEN SAVER		MODE 1
AUTO STANDBY		OFF
PRESS	KEY

PREFERENCE1		PREFERENCE2	SPK.SETTING
			5.1 CHANNEL
			LEVEL
			DELAY
			F.SP	Large
			C.SP	Small
			R.SP	Small
			BASS	S woofer
PRESS	KEY		TEST TONE

3 Press 5/° to align the arrow ( ) with the item you want to select.

PREFERENCE1	PREFERENCE2	SPK.SETTING
MENU		ENGLISH
AUDIO		ENGLISH
SUBTITLE		ENGLISH
ON SCREEN		ENGLISH
GUIDE		ON
MONITOR TYPE		4:3LB
PRESS	KEY

4Press 2/3 to select the setting.

Each time you press 2/3 the display changes and the displayed setting is selected.

5Repeat steps 3 and 4 for each setting.

•After you have finished making the settings, press 5/° continuously until the arrow appears in the tab again. Then press 2/3 to select the next screen.

6When you have finished making all the settings, press [SET UP]. The display returns to the normal display.

P

25