![](/images/new-backgrounds/1305299/30529943x1.webp)
Getting started
To connect to audio equipment with a digital input
You can enhance the sound quality by connecting either of the unit's DIGITAL OUT jacks to the digital input of an amplifier, MD, etc. by using an optional digital cable (OPTICAL or COAXIAL). The digital audio signal from a disc is directly transferred. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a
When you make the digital connection, we recommend also to make the analog connection, because, depending on discs, no signal may be output from the DIGITAL OUT.
Getting started
The unit
SUBWOOFER | CENTER | RIGHT | LEFT |
|
|
|
|
|
|
| REAR |
|
|
|
|
|
| VIDEO |
|
|
|
|
|
|
|
| AV COMPU LINK |
PCM / STREAM | RIGHT | LEFT |
| COMPONENT |
| |
|
| Y | PB | PR | ||
|
|
|
| |||
|
|
|
| FRONT |
|
|
OPTICAL COAXIAL |
|
|
|
| ||
DIGITAL OUT | AUDIO OUT |
|
| |||
VIDEO OUT |
|
Red
White
Coaxial digital cable (not supplied)
Audio cable (supplied)
The OPTICAL jack is protected by the hinged cover. To connect the optical cable to the jack, press the cover with the plug and connect it to the jack inside in the correct direction.
Optical digital cable (not supplied)
Digital equipment
White | IN | IN | |
LEFT | OPTICAL | ||
| |||
| AUDIO | DIGITAL | |
Red | RIGHT | COAXIAL | |
|
|
•For digital connection, connect the unit's DIGITAL output (OPTICAL or COAXIAL) to the digital input of an audio equipment using an optional digital cable.
NOTES
•When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the “DIGITAL AUDIO OUTPUT” setting in the “PREFERENCE 2”
•When you connect the unit's DIGITAL output to a Dolby Digital or DTS decoder (or amplifier with a
20