Kambrook KBL180, KBL120 manual Assembling and Attaching the Blender Jug

Using Your Kambrook Blender continued

8.Remove the silicone seal from the Removable Blade Holder (See. Fig. 3).

Fig. 3

NOTE: The blending blades are extremely sharp. Avoid any contact with fingers and hands.

Assembling and Attaching the Blender Jug

1.Place the motor base on a flat, dry surface such as bench top. Ensure the Speed Control Dial is in the ‘OFF’ position, the appliance is switched off at the power outlet and the power cord is unplugged.

2.Ensure the lid is off the blender jug and place the blender jug upside down on a flat, dry surface such as a bench top.

3.Place the silicone seal onto the Removable Blade Holder. Make sure the silicone seal sits under the grooves (See Fig. 4).

Fig. 4

4.Tilt the Removable Blade Holder at an angle and put it inside the jug.

5.Using the inner cap, insert the two tabs on the Removable Blade Holder (See Fig. 1).

6.Use one hand to hold the jug handle and the other to turn the inner cap anti-clockwise

to ‘’ and secure the Removable Blade Holder in place.

7.Turn the assembled blender jug upright and align the ‘’ symbol on the blender jug collar with the ‘ ’ symbol on the motor base. Once aligned turn the blender jug clockwise in the direction of

the ‘’ symbol on the motor base. Ensure the blender is securely positioned.

8.Place the lid on top of the blender jug and push down to seal. Insert the inner cap into the middle opening of the blender jug lid and turn clockwise to lock.

8