Pioneer DEH-P7850BT Initial Settings Setting the AM tuning step, Switching the warning tone

Black plate (78,1)

Section

14 Initial Settings

Setting the AM tuning step

The AM tuning step can be switched between 9 kHz, the preset step, and 10 kHz. When using the tuner in North, Central or South America, reset the tuning step from 9 kHz (531 kHz to 1 602 kHz allowable) to 10 kHz (530 kHz to 1 640 kHz allowable).

1Use MULTI-CONTROL to select AM step. AM step appears in the display.

2Press MULTI-CONTROL to select the AM tuning step.

Pressing MULTI-CONTROL repeatedly will switch the AM tuning step between 9 kHz and

10kHz. The selected AM tuning step will ap- pear in the display.

Switching the warning tone

If the front panel is not detached from the head unit within four seconds of turning off the ignition, a warning tone will sound. You can turn off the warning tone.

1Use MULTI-CONTROL to select Warning tone.

Warning tone appears in the display.

2Press MULTI-CONTROL to turn warning tone on.

ON appears in the display.

# To turn warning tone off, press MULTI-CONTROL again.

Switching the face auto open

For theft protection, the front panel opens automatically and easily detaches. Face auto open is on as a default.

1Use MULTI-CONTROL to select Face auto open.

Face auto open appears in the display.

78 En

2Press MULTI-CONTROL to turn the face auto open on.

ON appears in the display.

# To turn the face auto open off, press MULTI-CONTROL again.

Switching the auxiliary setting

Auxiliary equipments connected to this unit can be activated individually. Set each AUX source to ON when using. About connecting or using auxiliary equipments, refer to Using the AUX source on page 82.

1Use MULTI-CONTROL to select AUX1/ AUX2.

AUX1/AUX2 appears in the display.

2Press MULTI-CONTROL to turn AUX1/ AUX2 on.

ON appears in the display.

# To turn AUX off, press MULTI-CONTROL again.

Switching the dimmer setting

To prevent the display from being too bright at night, the display is automatically dimmed when the car’s headlights are turned on. You can turn the dimmer on or off.

1Use MULTI-CONTROL to select Dimmer. Dimmer appears in the display.

2Press MULTI-CONTROL to turn dimmer

on.

ON appears in the display.

# To turn dimmer off, press MULTI-CONTROL again.

Adjusting the brightness

You can adjust the display brightness. Initially this mode is set to 12.

<CRD4060-A/N>78