Pioneer DEH-P7850BT Before You Start Resetting the microprocessor, Clearing all memory

Black plate (8,1)

Section

01 Before You Start

Resetting the microprocessor

The microprocessor must be reset under the following conditions:

!Prior to using this unit for the first time after installation

!If the unit fails to operate properly

!When strange or incorrect messages ap- pear on the display

%Press RESET with a pen tip or other pointed instrument.

RESET button

Clearing all memory

To protect personal and private information, data about the phone stored in this unit can be deleted.

1Press SOURCE and hold until the unit turns off.

2Press MULTI-CONTROL and hold until Language select appears in the display.

3Turn MULTI-CONTROL to select Phone reset.

Phone reset appears in the display.

4Push MULTI-CONTROL right to show a confirmation display.

Clear memory YES is displayed. Clearing memory is now on standby.

#If you do not want to reset phone memory, press BAND.

5Press MULTI-CONTROL to clear the memory.

All data in the telephone source, including

Phone Book entries, number presets and the Call History is cleared.

Protecting your unit from theft

The front panel can be detached from the head unit and stored in the provided protective case to prevent theft.

!If the front panel is not detached from the head unit within five seconds of turning off the ignition, a warning tone will sound and the front panel will open.

!You can turn off the warning tone. See Switching the warning tone on page 78.

!You can turn off the face auto open. See Switching the face auto open on page 78.

Important

!Never use force or grip the display and the buttons too tightly when removing or attach- ing.

!Avoid subjecting the front panel to excessive shocks.

!Keep the front panel out of direct sunlight and high temperatures.

!A few seconds after turning the ignition switch to on or off, the front panel automati- cally moves. When this happens, your fingers may become jammed in the panel, so keep your hands away from it.

8 En

<CRD4060-A/N>8