Pioneer DEH-P7850BT Audio Adjustments Introduction of audio adjustments, Using balance adjustment

Audio Adjustments

Introduction of audio adjustments

1

1Audio display

Shows the audio adjustment status.

1Press MULTI-CONTROL to display the main menu.

FUNCTION, AUDIO and ENTERTAINMENT appear on the display.

2Use MULTI-CONTROL to select AUDIO. Turn to change the menu option; press to se- lect.

The audio function name appears on the dis- play.

3Turn MULTI-CONTROL to select the audio function.

Turn MULTI-CONTROL clockwise or counter- clockwise to switch between the audio func- tions in the following order:

Fader (balance adjustment)—PWRFL (graphic equalizer adjustment)—50Hz (7-band graphic equalizer adjustment)—LOUD (loudness)— Sub W.1 (subwoofer on/off setting)—Sub W.2 (subwoofer setting)—Bass (bass boost)—HPF (high pass filter)—SLA (source level adjust-

ment)

# You can also switch between the audio func- tions in reverse order by turning

MULTI-CONTROL counterclockwise.

# You can select the Sub W.2 only when sub-

woofer output is turned on in Sub W.1.

# When selecting the FM tuner as the source, you cannot switch to SLA.

	Black plate (71,1)
		Section
		13
#		English
	To return to the display of each source, press

BAND.

Note

If you do not operate the audio function within about 30 seconds, the display is automatically re- turned to the source display.

Using balance adjustment

You can change the fader/balance setting so that it can provide you an ideal listening envir- onment in all occupied seats.

1Use MULTI-CONTROL to select Fader.

Fader appears in the display.

# If the balance setting has been previously ad- justed, Balance will be displayed.

2Push MULTI-CONTROL up or down to adjust front/rear speaker balance.

Each time MULTI-CONTROL is pushed up or down, the front/rear speaker balance moves towards the front or rear.

F 15 to R 15 is displayed as the front/rear

speaker balance moves from front to rear.

# F/R 0 is the proper setting when only two

speakers are used.

# When the rear output setting is Rear SP :S/W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller on page 79.

3Push MULTI-CONTROL left or right to adjust left/right speaker balance.

Each time MULTI-CONTROL is pushed left or right, the left/right speaker balance moves to- wards the left or right.

L 15 to R 15 is displayed as the left/right speaker balance moves from left to right.

En 71

<CRD4060-A/N>71