Pioneer DEH-P7850BT Disconnecting a cellular phone, Registering connected cellular phone

Bluetooth Telephone

#The link code is set to 0000 as default. You can change this code in the initial setting. Refer

to Entering PIN code for Bluetooth wireless con- nection on page 80.

Disconnecting a cellular phone

When you are done using your phone with this unit, you can close the Bluetooth wireless con- nection.

1Use MULTI-CONTROL to select Disconnect phone in the function menu. Device name of the connected phone appears in the display.

2Press MULTI-CONTROL to disconnect a cellular phone from this unit.

After the disconnection is completed, Disconnected is displayed.

Registering connected cellular phone

You can register a phone that is temporarily connected to this unit in order to take full ad- vantage of the features available with Blue- tooth wireless technology. A total of five phones can be registered: three user cellular phones and two guest phones. When regis- tered as a user phone, all the possible func- tions are available for use. When registered as a guest phone, some functions are limited.

1Use MULTI-CONTROL to select Set phone in the function menu. Set phone appears in the display.

Black plate (37,1)

Section

07

2 Push MULTI-CONTROL up or down to	English
select a registration assignment.
Each time MULTI-CONTROL is pushed up or
down, the registration assignment is switched
in the following order:
P1 (user phone 1)—P2 (user phone 2)—P3
(user phone 3)—G1 (guest phone 1)—G2
(guest phone 2)
# As you select each assignment, you can see
whether or not a phone is already registered
there. If the assignment is empty, No data is dis-
played. If the assignment is already taken, the de-
vice name appears. If you want to replace an
assignment with a new phone, first delete the
current assignment. For more detailed instruc-
tions, see Deleting a registered phone on this
page.
# If you need to know the BD (Bluetooth Device)
address of the phone, push MULTI-CONTROL left
here.
3 Press MULTI-CONTROL to register the
cellular phone to this unit.
When the registration is completed,
Reg. Completed is displayed.
# If the registration failed, Reg. ERROR is dis-
played. In this case, return to step 1 and try
again.

Deleting a registered phone

If you no longer need to use a registered phone with this unit, you can delete it from the registration assignment for another phone.

1 Use MULTI-CONTROL to select Delete phone in the function menu. Delete phone appears in the display.

En 37

<CRD4060-A/N>37