Pioneer DEH-P7850BT Initial Settings, Setting the clock, Setting the FM tuning step

Initial Settings

3Push MULTI-CONTROL up or down to set the date.

Pushing MULTI-CONTROL up will increase the selected day, month or year. Pushing

MULTI-CONTROL down will decrease the se- lected day, month or year.

Black plate (77,1)

Section

14

— If the minute is 30 to 59, the minutes are	English
rounded up. (e.g., 10:36 becomes 11:00.)
! Even when the sources are off, the clock dis-
play appears on the display. Pressing CLOCK
when the sources and feature demo are off,
turns the clock display on or off.

Setting the clock

Use these instructions to set the clock.

1Use MULTI-CONTROL to select Clock. Clock appears in the display.

2Push MULTI-CONTROL left or right to select the segment of the clock display you wish to set.

Pushing MULTI-CONTROL left or right will se- lect one segment of the clock display: Hour—Minute

As you select segments of the clock display the segment selected will blink.

3Push MULTI-CONTROL up or down to set the clock.

Pushing MULTI-CONTROL up will increase the selected hour or minute. Pushing MULTI-CONTROL down will decrease the se- lected hour or minute.

Notes

!You can match the clock to a time signal by pressing MULTI-CONTROL.

—If the minute is 00 to 29, the minutes are rounded down. (e.g., 10:18 becomes 10:00.)

Setting the FM tuning step

The FM tuning step employed by seek tuning can be switched between 100 kHz, the preset step, and 50 kHz.

1Use MULTI-CONTROL to select FM step. FM step appears in the display.

2Press MULTI-CONTROL to select the FM tuning step.

Pressing MULTI-CONTROL repeatedly will switch the FM tuning step between 50 kHz and 100 kHz. The selected FM tuning step will appear in the display.

Note

If seek tuning is performed in 50 kHz steps, sta- tions may be tuned in imprecisely. Tune in the sta- tions with manual tuning or use seek tuning again.

En 77

<CRD4060-A/N>77