Pioneer DEH-P7850BT Audio Adjustments Using the equalizer, Recalling equalizer curves

Black plate (72,1)

Section

13 Audio Adjustments

Using the equalizer

The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired.

Recalling equalizer curves

There are seven stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves:

Display	Equalizer curve
Powerful	Powerful
Natural	Natural
Vocal	Vocal
Custom1	Custom 1
Custom2	Custom 2
Flat	Flat
S.Bass	Super bass

!Custom1 and Custom2 are adjusted equal- izer curves that you create. Adjustments can be made with a 7-band graphic equali- zer.

!When Flat is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between Flat and a set equalizer curve.

%Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol- lowing equalizers: Powerful—Natural—Vocal—Custom1— Custom2—Flat—S.Bass

Adjusting equalizer curves

The factory supplied equalizer curves, with the exception of Flat, can be adjusted to a fine de- gree (nuance control).

1Use MULTI-CONTROL to select the gra- phic equalizer adjustment.

PWRFL appears in the display.

If the equalizer curve has been previously se- lected, the curve of that previously selected will be displayed instead of PWRFL.

2Push MULTI-CONTROL left or right to select an equalizer curve.

Each time MULTI-CONTROL is pushed left or right, equalizer curves are selected in the fol- lowing order:

PWRFL—Natural—Vocal—Custom1— Custom2—Flat—S.Bass

3Push MULTI-CONTROL up or down to adjust the equalizer curve.

Each time MULTI-CONTROL is pushed up or down, the equalizer curve increases or de- creases respectively.

+6 to –4 (or –6) is displayed as the equalizer

curve is increased or decreased.

# The actual range of the adjustments are differ- ent depending on which equalizer curve is se-

lected.

# The equalizer curve with all frequencies set to

0cannot be adjusted.

Adjusting 7-band graphic equalizer

For Custom1 and Custom2 equalizer curves, you can adjust the level of each band.

!A separate Custom1 curve can be created for each source. (The built-in CD player and the multi-CD player are set to the same equalizer adjustment setting automati- cally.) If you make adjustments when a curve other than Custom2 is selected, the equalizer curve settings will be memorized in Custom1.

!A Custom2 curve can be created common to all sources. If you make adjustments when the Custom2 curve is selected, the Custom2 curve will be updated.

72 En

<CRD4060-A/N>72