Pioneer DEH-P7850BT operation manual Audio Adjustments, Adjusting loudness, Using subwoofer output

Audio Adjustments

1Recall the equalizer curve you want to adjust.

See Recalling equalizer curves on the previous page.

2Use MULTI-CONTROL to select 7-band graphic equalizer adjustment.

Frequency and the level (e.g., 50Hz +4) ap- pears in the display.

3Push MULTI-CONTROL left or right to select the equalizer band to adjust.

Each time MULTI-CONTROL is pushed left or right, equalizer bands are selected in the fol- lowing order:

50—125—315—800—2k—5k—12.5k (Hz)

4Push MULTI-CONTROL up or down to adjust the level of the equalizer band. Each time MULTI-CONTROL is pushed up or down, the level of the equalization band in- creases or decreases.

+6 to –6 is displayed as the level is increased

or decreased.

# You can then select another band and adjust the level.

5Press BAND to cancel the 7-band gra- phic equalizer adjustment.

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.

1Use MULTI-CONTROL to select LOUD. LOUD appears in the display.

2Press MULTI-CONTROL to turn loudness

on.

Loudness level (e.g., Mid) appears in the dis- play.

	Black plate (73,1)
		Section
		13
#		English
	To turn loudness off, press MULTI-CONTROL

again.

3Push MULTI-CONTROL left or right to select a desired level.

Each time MULTI-CONTROL is pushed left or

right, level is selected in the following order: Low (low)—Mid (mid)—High (high)

Using subwoofer output

This unit is equipped with a subwoofer output which can be turned on or off.

1Use MULTI-CONTROL to select Sub W.1. Sub W.1 appears in the display.

2Press MULTI-CONTROL to turn subwoo- fer output on.

Normal appears in the display. Subwoofer out-

put is now on.

# To turn subwoofer output off, press MULTI-CONTROL again.

3Push MULTI-CONTROL left or right to select the phase of subwoofer output. Push MULTI-CONTROL left to select reverse phase and Reverse appears in the display. Push MULTI-CONTROL right to select normal phase and Normal appears in the display.

Adjusting subwoofer settings

When the subwoofer output is on, you can ad- just the cut-off frequency and the output level of the subwoofer.

1Use MULTI-CONTROL to select Sub W.2.

Sub W.2 appears in the display.

# When the subwoofer output is on, you can se- lect Sub W.2.

En 73

<CRD4060-A/N>73