Operating instructions | KM 100/100 R / KM 100/100 R P | English |
Checking the sealing cup
!The sealing cup must be regularly checked for a proper fit.
Sealing cup at the suction turbine
Replacing side brush
!Unscrew fastening screws (3 pieces) at the underside
!Slip side brush on carrier and screw it tight
Check the sweep roller
!Stand sweeper on a flat surface
!Raise the sweep roller
!Turn key switch to "0" and remove key
!Secure the machine against rolling away using a wedge
!Remove the debris container from both sides of the unit
!Remove tapes and string from the sweep roller
Replace the sweep roller
—Replacing it is necessary when the sweeping effect visibly
deteriorates due to wear of the bristles.
!Stand sweeper on a flat surface
!Raise the sweep roller
!Turn key switch to "0" and remove key
!Secure the machine against rolling away using a wedge
!Remove the debris container from both sides of the unit
!Unscrew front screw of right side panellint
!Unscrew rear screws of right side panelling
!Unscrew screws
!Loosen fastening screw of the bowden cable and unhitch the cable
!Unscrew the screw at the fulcrum of the main brush rocker arm
!Pull off the main brush rocker arm
!Lift off cover and remove main brush
28
