INSTALLATION AND CONNECTION
Only for connection in a motor home, not in a caravan!
•The green connecting cable, marked “IGNITION” allows you the option of connection to a circuit in the vehicle that is activated when the ignition key is turned and then carries a continuous 12 V supply. This type of connection ensures that when the engine is started the antenna is automatically lowered into the park position (the receiver does not need to be turned on).
Note that the antenna can then be lowered only when the power supply is present in addition to the ignition signal!
•Check the connections before you
•For commissioning and more detailed information on additional operator functions, we refer you to the separate operating manual enclosed.
FUNCTIONAL INSTRUCTIONS FOR CONNECTION TO THE
Under certain circumstances, problems can arise when the units are connected to different connecting sockets or circuits/earth potentials. If no others are available, it is recommended that you connect the connecting sockets for receiver and TV set to the same cable, as shown in Figure “G”. The current rating of the circuit used must be checked with respect to the intended application.
Further information on operating the UFS 740sw receiver can be found in the operating manual supplied with the unit.
22
