
DISMANTLING FOR SERVICING
If repairs to the system or individual components are necessary, contact your specialist dealer or our service centre (see below for address).
Never open the turntable yourself!
DISMANTLING
•Do not cut the cables! At the cable junction provided, disconnect the cables projecting from the turntable from the two cables laid within the interior of the vehicle (unplug the plug).
•The cables laid within the vehicle can remain there
•Unscrew the six M6 screws securing the turntable to the mounting plate
•Place two wooden supports on the vehicle roof, for protection
•Then place the turntable on the prepared wooden supports
•To ship the turntable, use the original packaging which you have saved
•Seal the opening in the vehicle roof appropriately to protect against the ingress of moisture
•If a HDZ 100 roof gland has been fitted and the equipment is then removed, the cable channels no longer used should be sealed with the integral plugs. The enclosure is then watertight once again.
Note: Before exchanging the UFS 740sw, first move the turntable to the park position.
ADDRESS OF THE SERVICE CENTRE
ESC
Electronic Service Chiemgau GmbH
Bahnhofstraße 108
83224 Grassau, Germany
Phone: | +49 | 8641 |
Fax: | +49 | 8641 |
Internet:
25