IMPORTANT INFORMATION FOR CAP 700 BEFORE SETUP
This section of the UFS 740 operating manual for the turntable assumes that the UFS 740 and the turntable have been properly installed and connected, as described in the installation and operating manuals!
If you have not yet done so, read the safety instructions at the beginning of the UFS 740sw operating manual and follow them when handling the UFS 740sw and the turntable!
Before setting up your satellite system, make sure that the location allows a free view to the satellite positions to the South and is not shadowed by trees or other obstructions. This will save you time and effort!
So as to avoid overheating the turntable motors, do not operate the motors continuously for longer than 10 minutes.
None of the search procedures initiated by the CAP 700 will require as much as 10 minutes operation. Only repeated unsuccessful search procedures or manual overrides by the user can cause this limit to be exceeded.
Reception
reception No
REMOTE CONTROL
All settings on the UFS 740 are made using the remote!
43
