INSTALLATION AND CONNECTION
BRIEF INSTRUCTIONS FOR INSTALLING THE TURNTABLE
The sequence of pictures shown illustrates all the necessary installation steps that are required to install the turntable and the BAS 60 parabolic reflector on the roof of the vehicle.
The other detailed instructions in this installation and operating manual must also be followed!
Determination of installation location. Caution! System has a turning range of 162 cm (Ø). Drill hole with
Ø38 mm. Deburr sharp edges of hole.
Apply Sikaflex® 291 adhesive to the spigot of the roof gland. Insert the spigot into the hole and secure it from below with the knurled nut.
Unscrew screws (x 6, 10 AF) from the mounting plate and remove the mounting plate.
Place the turntable on prepared wooden supports to protect the roof of the vehicle.
17
