Kathrein UFC 662sw manual Rename Favourites List, Edit Tv-Channellist, Lock Channels

EDIT TV-CHANNELLIST

LOCK CHANNELS

Use the  buttons to select the channel to be blocked in the favourites list you have selected. Press the  button to open the edit menu and use the  buttons to select the “Lock” function.

Confirm the command by pressing the  button. You are now prompted to enter the PIN code (factory default setting: 0000).

The channel you previously selected is now shown with a padlock to its right. In future this channel can be viewed only by entering the four-digit PIN code.

The channel is also locked on all other channel lists. You need not additionally lock the channel in the other channel lists.

This function can be restored again using the edit menu (select: “Unlock”).

RENAME FAVOURITES LIST

Use the  buttons to select the favourites list to be renamed. Press the  button to open the edit menu and use the  buttons to select the “Rename favourites list” function.

Confirm the command by pressing the  button. A keypad will now be displayed with which you can enter the desired name alphanumerically using the numeric pad on the remote control. See also the section “Operating Instructions”, “Alphanumeric Entries”)

START BLOCKSELECTION (HIGHLIGHTING SEVERAL CHANNELS)

Use the  buttons to select the channel starting from which you want to highlight further channels. You can only select channels that are listed in succession in your selected favourite list. Press the

button to open the edit menu and use the  buttons to select the “Start Blockselection”

function. Confirm with the  button. Now use the  buttons to highlight the desired channels, starting from the previously highlighted channel and working upwards or downwards. The highlighted channels will be highlighted in yellow and marked with a tick on the left. When you have highlighted

the channels that you wish to select, press the  button to open the edit menu once again and use the  buttons to select the desired function (“Remove from favourites list”, or “Unlock”). Confirm with the button.

The selected function can now be used in the same way as described for the respective items in this section for a single channel.

39