SERVICE MENU
Select the “Service” menu using the button, the buttons in the main menu and . The following display appears:
Current software version
Hardware version
Last update run
Date of the channel list
FACTORY RESET
Select the “Service” menu using the button, the buttons in the main menu and .
Use the buttons to switch to “Factory Reset” and to call them up press the button. The following display appears:
You are now prompted to enter the PIN code (factory default setting: 0000). After entering the PIN using the number pad you are shown the following display:
Press the button to load the factory settings. You will also be asked if you wish too delete the channel
list. Press the button to delete the channel list, or press the button merely to reset to settings. Following the factory reset the receiver then automatically starts the First Installation procedure.
53
