Programming TV programmes
∙Call up the audio menu: press keys 
+ 
in succession.
∙Switch between video and audio menus using the 
key or the 
key.
∙Select the desired menu line using the keys: 
.
∙For direct numeric input use the keys: 
...
| or |
|
|
|
|
|
| ∙ | Alter the values | keys. | |||
| ∙ | Press the | key twice in order to save your settings. | |||
| ∙ |
|
| |||
Note | Exit from the menu using the |
| key. |
| ||
|
| |||||
Frequent reference is made to saving the settings in subsequent descriptions. It is | ||||||
| always sufficient, however, if you save the settings in the video and audio menus | |||||
| just once before exiting from the programme slot or before exiting from setup | |||||
| mode. |
|
|
|
| |
The “Video” menu
The following settings can be made in the video menu:
Setting options: Programme slot 1 to 250
Transmission frequency from 10700...12747 MHz Hor Low / Vert Low / Hor High / Vert High
1 to 4
16 or 25 MHz LO 1 to LO 4
See separate decoder menu
The bottom line shows the keys you can use to make the settings.
Description of menu entries
Satellite frequency
With input via the numeric keys 
...
, frequency input is in
range 10700 to 12747 MHz. With the 
keys you can attain the optimum receiv- ing frequency by moving in 1 MHz steps (recommended if the picture is grainy due to weak signals).
Polarisation/Oscillator
In menu entry “Polarisation“, the voltage level is used (14 or 18V) to set the polarity (vertical or horizontal).
In the “Oscillator" menu entry, the oscillator frequency group LO 1 to LO4 is se- lected. With the oscillator frequency the high satellite frequency is converted to the satellite IF frequency. This allows troublefree matching to different feed systems.
Frequency range | Polarisation | LNB | Setting | LO | LO |
|
| voltage |
| group | frequency |
10.70 – 11.70 GHz | horizontal | 18 V | Hor Low | LO 1 | 9750 MHz |
10.70 – 11.70 GHz | vertical | 14 V | Vert Low | LO 2 | 9750 MHz |
11.70 – 12.75 GHz | horizontal | 18 V | Hor High | LO 3 | 10600 MHz |
11.70 – 12.75 GHz | vertical | 14 V | Vert High | LO 4 | 10600 MHz |
For setting of LO frequencies refer to section: “Initial setting".
21
