Initiation
14
Initiation with BZD 30 indoor Antenna
1. Switch on both the TV set and the receiver.
- Press (Stand-by) on the remote control to switch the re-
ceiver to operational mode (LED flashes green).
2. Switch the TV set to AV mode, unless it switches automatically.
3. In order to activate the voltage supply of the antenna, carry out
the following steps with the remote control of the receiver:
- Press to enter the main menu.
- Select the sub-menu 'installation' with and confirm
your entry with .
- Now select 'net. configuration' with . Press to con-
firm your entry.
- Press once again to call up 'operation'
- Now change the selection for the supply voltage from 'OFF'
to 'ON' by pressing (see photo).
- Now the antenna is energised with 5 V.
- Press four times to get back to the TV mode.