Hard Disk Recorder

Setting and Deleting Indices

During the replay of a recorded programme you can set indices by

pressing (). The episode you set between two indices will now be skipped on the next replay (e. g. for films and recordings without advert breaks).

Indices can only completely be deleted in a recording (see screen shot above).

Delayed Replay

You can interrupt a current recording by pressing (in the background the recording is continued). Press to continue the

recording just where you stopped it. Press to rewind the current programme (to search scenes), and have them repeated by pressing

. After pressing , you can continue watching the current programme time delayed.

Audio Mode

The audio modes 'S' (stereo), 'L' (mono left) or 'R' (mono right), Dolby

Digital AC 3 or MPEG stereo can be set with the yellow key and the cursor keys.

Search

Visible Search

You can carry out a visible search in four steps (up to four arrows are displayed) in the regular replay by pressing and

In audio recordings this function does not work due to the automatic mute function.

Time-Controlled Search

If the control panel is active, you can carry out a time-controlled search when you have a freeze image displayed on the screen () by pressing and .

The longer the the forward/rewind key is kept pressed, the faster the search speed becomes. You can tell this by the bar and by the numerical indication.

Press to continue the regular replay on the desired position.

Freeze Image

Press to have a freeze image where desired. Unlike replays of tape recordings, you can have freeze images as often as you like as they are of unchanging digital quality without any 'wearout'.

Slow Motion

Press the red () key to slow down the speed of the regular recording in four steps. Each time you press the red key, you halve

the slow motion speed. Press to get back to normal replay speed.

41

Page 41
Image 41
Kathrein UFD 574/S Setting and Deleting Indices, Delayed Replay, Audio Mode, Search Visible Search, Time-Controlled Search