FIRST INSTALLATION
The following display appears:
System
Select the setting here to match your reception system using the buttons. You have the following options:
-DiSEqC™1.0
-One Cable
-LNB only
If your reception system supports DiSEqC™, in “System” select “DiSEqC™1.0” (is used for switch- over from one received satellite to another). If your reception system does not support DiSEqC™, select the setting “LNB only”. If your receiver is connected to a
Press the button to move to the next menu item.
Continue with the relevant section of “First Installation”.
When selecting the satellite(s), make sure that your reception position is aligned to the desired satellite(s)!
14
